Load data for .35 Rem. + .358 | 250gr | Rhino Solid Shank

Recommended Powder(s): Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 250gr \| Rhino Solid Shank
Bullet Weight:	250gr \| 16.2g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	1.265" \| 32.1mm
Caliber:	.35 Rem. load data
Case Length (l3):	1.920" \| 48.8mm
Cartridge Length (C.O.L.):	2.487" \| 63.2mm
Seated Depth:	0.698" \| 17.7mm
Shank Seated Depth:	0.698" \| 17.7mm
Case Capacity:	51.0 Grains of Water \| 3.31 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	39885 psi \| 2750 bar
LID:	LID_B5250_C483
Last updated:	2025-01-01

Load data for 42 loads in caliber .35 Rem. with .358 | 250gr | Rhino Solid Shank bullet and 21 powders such as Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	35578	89%	**70	100%
[ADI AR 2219]*	<<locked>>	91%	34795	87%	**67	94%
Accurate 2015	<<locked>>	97%	33678	84%	**57	97%
[Accurate 2495]*	<<locked>>	96%	24323	61%	**72	93%
Alliant AR-Comp	<<locked>>	97%	30530	77%	**37	97%
Alliant Reloder-10x	<<locked>>	95%	35810	90%	**00	98%
Alliant Reloder-7	<<locked>>	86%	35665	89%	**34	98%
Baschieri & Pellagri 106	<<locked>>	90%	35665	89%	**14	95%
[Hodgdon H322]*	<<locked>>	96%	34795	87%	**67	94%
[Hodgdon H335]*	<<locked>>	92%	35505	89%	**86	93%
[Hodgdon H4198]*	<<locked>>	86%	35012	88%	**78	94%
IMR 4198	<<locked>>	91%	35447	89%	**31	98%
Norma 200 👍	<<locked>>	90%	34751	87%	**70	98%
[Rottweil R 901]*	<<locked>>	97%	32474	81%	**21	92%
SNPE Vectan BA6 1/2	<<locked>>	83%	35882	90%	**83	100%
[SNPE Vectan SP 10]*	<<locked>>	91%	35172	88%	**83	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	32895	82%	**75	92%
[Somchem S335]*	<<locked>>	96%	30589	77%	**65	92%
Vihtavuori N120	<<locked>>	90%	34983	88%	**31	100%
Vihtavuori N130	<<locked>>	96%	35346	89%	**37	98%
[Vihtavuori N133]*	<<locked>>	96%	29675	74%	**36	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	28224	71%	**42	99%
[ADI AR 2219]*	<<locked>>	83%	27296	68%	**19	90%
[Accurate 2015]*	<<locked>>	85%	23859	60%	**60	92%
[Accurate 2495]*	<<locked>>	91%	20740	52%	**77	90%
[Alliant AR-Comp]*	<<locked>>	86%	22698	57%	**47	93%
[Alliant Reloder-10x]*	<<locked>>	81%	23482	59%	**57	93%
Alliant Reloder-7	<<locked>>	81%	30530	77%	**45	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	26818	67%	**47	91%
[Hodgdon H322]*	<<locked>>	88%	27296	68%	**19	90%
[Hodgdon H335]*	<<locked>>	88%	30850	77%	**98	91%
[Hodgdon H4198]*	<<locked>>	81%	29950	75%	**86	92%
IMR 4198	<<locked>>	81%	26643	67%	**63	96%
Norma 200	<<locked>>	81%	26208	66%	**13	96%
[Rottweil R 901]*	<<locked>>	93%	28834	72%	**52	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	33431	84%	**50	100%
[SNPE Vectan SP 10]*	<<locked>>	86%	29501	74%	**75	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	94%	29588	74%	**19	90%
[Somchem S335]*	<<locked>>	91%	26194	66%	**80	90%
Vihtavuori N120	<<locked>>	81%	27064	68%	**90	99%
[Vihtavuori N130]*	<<locked>>	84%	24845	62%	**40	94%
[Vihtavuori N133]*	<<locked>>	91%	25599	64%	**50	92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data